Independiente Mug (King of Cups) - No AMS

For fans of Rojo! I share with you this Independiente Mug designed entirely by me. It's an optimized model so anyone can print it, even if you don't have an automatic color changing system (AMS).

The design is 100% Support-Free, which means no extra material is wasted on supports and the finishes are impeccable from the base to the handle.

IMPORTANT: This is a 500CC 3D printed PLA cup, designed to insert a standard sheet metal/aluminum cup inside. This ensures it is hygienic and keeps drinks cold.
Print Guide (Tested on Bambu Lab A1):

• Manual Color Change: The model is designed to pause printing at specific layers where the color changes (for example, on the base's edge and body details). You just need to add a "Pause" in the slicer (Bambu Studio) and change the filament.
• Supports: DISABLED. Not needed.
• Infill: 15% - 20% (Gyroid recommended).
• Walls: 3 walls to ensure the handle is sturdy.
• Material: PLA (for decoration) or PETG (if you prefer a bit more heat resistance).

Assembly Instructions:

1. Print the body and the logos (they come on separate plates to facilitate color change).
2. The logos fit into the mug's cavities. You can use a drop of cyanoacrylate (super glue) to fix them.
3. Slide your sheet metal cup inside. The fit is exact, but if your cup is slightly larger, you can scale the model 1% or 2% in the slicer.

English Summary:

Independiente FC Beer Mug (Chop). 100% Support-free design. Optimized for manual filament changes (No AMS required). Just add pauses at the desired heights to change colors. Designed to fit a standard metal cup insert for food safety. Tested and verified print!