HueForge – Emissary Breakwater (Santos/SP)

This model is a HueForge inspired by the Submarine Emissary Breakwater in Santos. The goal was to transform an iconic city landmark into an artistic relief piece, using few colors and strong contrast to highlight the sculptural form of the work against the sea and sky.

The model was designed for multi-color printing by filament swap, without the need for AMS, working well on single-extruder printers. The relief highlights the breakwater in the foreground, creating depth and clear readability even in a compact size.

📐 Recommended size: 120 × 120 mm

Color order and filament changes

Blue: Start of print up to 0.34 mm

White: Change at layer 3 - From 0.34 mm to 0.98 mm

Bronze: Change at layer 11 - From 0.98 mm to 1.62 mm

Silver: Change at layer 19 - From 1.62 mm to 2.02 mm

Red: Change at layer 24 - From 2.02 mm to 2.34 mm

Orange: Change at layer 28 - From 2.34 mm to 2.58 mm

White (final): Change at layer 31 - From 2.58 mm to 2.74 mm

This is my first HueForge, made with great care. If anything can be improved or adjusted, I warmly accept suggestions.

Powered by MakerWorld-Chroma Canvas (https://makerworld.com/makerlab/chromaCanvas)