Kekz Storage for Headphones & Audio Chips

Finally, order for the Kekz audio chips in the children's room!

Here you can print a rotating stand for up to 27 Kekz audio chips and their corresponding headphones. The Kekz chips are simply placed into the storage holders and can be easily pushed out from below through a hole and removed by children. The levels are freely rotatable on the rod, so that despite the compact design, all Kekz can be accessed at any time. The headphones can be placed on the hanger at the very top.

It can be printed modularly, the whole thing consists of:

• Base Plate: I personalized it with the children's names. Feel free to remix and add your own text here. The print template is without lettering.
• Rod: Is press-fitted onto the base plate. Pay attention to the small square on the underside and fit it together cleanly. This serves as anti-rotation protection; after all, the arms, not the central rod, should rotate later. If desired, it can also be glued with a drop of superglue or craft/plastic glue, but it is not necessary.
• Triple Arms: The trays into which the chips are inserted. Here you can let loose with your children's (or your own ;) ) favorite colors. The model doesn't have to be equipped with arms all the way to the top; you can start with fewer layers and gradually print more.
• Headphone Holder: This is placed on the rod just like the base plate. I recommend not gluing it so that it can be removed at any time later and additional layers can be added or exchanged.

I deliberately designed it to be a bit more robust so that it can withstand the rough everyday life of a children's room.