ROFLEXS-EXTRA-TANSPORT
Print Profile(1)
Description
This is a holder for the safe transport of Roflex's fence posts
There is a version for four fence posts and an extension for eight fence posts
Four Fence Elements
For this, you need two of the tall stand elements and two of the flat lid elements
In both the lid element and the stand element, there are through-holes so that an M6 threaded rod with a knob can be inserted The knobs and M6 threaded rods can be obtained from a hardware store and must be cut to fit the knob
For example, four M6 insert nuts must then be installed in the base
The stand element also has two outer holes so that the element can be attached to a base with two M8 screws
The base plate (per element) must then look something like this from the outside
With 2 holes for M8 screws on the outside and placeholders for the M6 insert nuts
I will attach these elements to an airline track However, since I cannot print this size in one piece on my P1S I will make them from hardwood
Eight Fence Elements
If you have more than four fence posts you can print two additional middle sections
The only change from the version for four fence posts is that longer threaded rods are needed
Middle sections are still printing … Pictures to follow …
Hardware Store - Items
- 4 M6 insert nuts
- 4 M6 knobs
- 4 M6 nuts (for counter-locking the knobs)
- 4 body washers (large washers) M6 for under the knobs
- 4 M6 threaded rods
- 4 M8 screws
- 4 M8 nuts
- 8 M8 washers
Boost Me (for free)
If you like this model, I would be very happy about a boost.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)