Print Profile(1)
Description
Ritratto di Masha
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm
PLA Esun Black Transmission Distance: 1
PLA+ Esun Pine Green Transmission Distance: 1.2
PLA+ Esun Pink Transmission Distance: 5
PLA Esun Cold White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Pine Green
At layer #7 (0.64mm) swap to Pink
At layer #11 (0.96mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)