CYC Pendant Light

Tired of the messy light cables you often find in apartments? This model is my renter-friendly solution to hide and manage excess ceiling-light cable without cutting, drilling, or damaging the ceiling.

The system uses only cable ties to secure and bundle the cable inside the top part, then a simple 3-part assembly to mount a pendant lampshade cleanly and safely. Perfect for apartment renters who want a cleaner look with a removable setup.

Assembly instructions

1. Top part (cable management)
   1. If the light cable is short enough, position the cable in the center of the ceiling/top part.
      Hold it tightly using 3 cable ties through the built-in cable-tie tunnels.

   2. If the light cable is a bit long:

      -Secure the cable first with 1 cable tie.
      -Route/wrap the remaining cable around until the length is short enough.
      -Secure the remaining cable using 2 more cable ties.

2. Connect the middle part to the top part with the thread.
3. Mount the pendant light shading
   -Install the M3 heat-set inserts into the pendant part.
   -Connect the pendant part to the middle part using M3 x 10 mm screws.
   -There are 6 mounting holes available— you can only use 1 hole per location (3 total).

Happy Decor!

Additional materials needed

• 3 cable ties (4 mm width)
• M3 heat-set inserts (minimum 3)
• M3 x 10 mm screws (minimum 3)

Safety & disclaimer

This is a decorative cable-management and mounting accessory. It does not replace proper electrical hardware or installation practices.

• Always switch off the power at the breaker before working near any ceiling wiring.
• Do not modify, cut, or reconnect electrical wires as part of this build.
• Use only parts/materials that can tolerate the heat produced by your bulb/fixture, and keep the assembly clear of hot components.

Use at your own risk: By downloading/printing/assembling this model, you accept full responsibility for installation and use. The designer/maker assumes no liability for any damage, injury, fire, electrical fault, or other accidents that may occur.