Quick Release Steering Wheel Horn Delete
Print Profile(1)
Description
If you have an quick release steering wheel and don't like the horn button or just lost it at some point - here's a replacement!
Now you can make a plate or cover the messy wires hangin' out.
I've installed and tested the larger plate with 15% infill but suggest printing it with at least 30% so when you torque the bolts down they don't cause any issues.
I also highly suggest printing in ABS or ASA for UV and heat resistance and using blue Loctite on the hardware so they don't back out.
Hope this helps! And if anybody gets creative with the prints, please post pics below!
Blue Loctite - https://www.amazon.com/Loctite-Heavy-Duty-Threadlocker-Single/dp/B000I1RSNS?th=1
PS - I printed face down for the texture but if you don't care for that and want to save material and time, just flip it over.
Good luck!
Boost Me (for free)
Anything helps. :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)