Search models, users, collections, and posts

Portland Thorns FC Dimensional Mosaic

IP Report

Print Profile(3)

All
P1S
H2C
X1
H2S
A2L
X1E
P1P
H2D
X1 Carbon
H2D Pro
A1
P2S
X2D

Up to 10 Colors .4mm nozzle, .2mm layer, 3 walls, 10% infill
Up to 10 Colors .4mm nozzle, .2mm layer, 3 walls, 10% infill
Designer
9.5 h
1 plate
5.0(1)

Original Colors .4mm nozzle, .2mm layer, 3 walls, 10% infill
Original Colors .4mm nozzle, .2mm layer, 3 walls, 10% infill
Designer
10 h
1 plate

0.4mm nozzle, 0.2mm layer - NO AMS VERSION!
0.4mm nozzle, 0.2mm layer - NO AMS VERSION!
Designer
9.2 h
1 plate

Open in Bambu Studio
Boost
3
6
1
0
2
1
Released 

Description

Boost Me (for free)

If you enjoyed this model, please drop it a like and leave a comment. If you loved it, you could also give it a boost. Either way, these things let us know that this sort of model is where we need to dedicate our time and attention. Don't forget to toss us a Follow. Thanks so much for your support! Looking for a commercial license or a way to support our work? https://buymeacoffee.com/marsarunity Wanna see what else we can do? Check out our website! https://marsarunity.com/

The original model matches the colors of one of the Portland Oregon FC logos. This means that the dimensional mosaic in the “background” is one solid color (default black). I have included a 10 color profile for those that want to change things up and make the dimensional mosaic pop. The layers for the color changes are listed below. Just set them to whatever color you want. The default colors are placeholders only. This model includes a nail hole on the back, in case you want to hang it on a wall. I haven't actually printed it because it was originally a request and I don't personally need a printed version. So, it'd be wasted filament for me. But I used the same settings as all other models similar to this one that I've printed and they've all turned out great. I imagine this one will too.

 

Layer 1: Black

Layer 34: Purple

Layer 41: Blue

Layer 47: Orange

Layer 54: Dark Green

Layer 59: Yellow

Layer 62: White

Layer 64: Pink

Layer 67: Red

Layer 70: Light Green

 

This model will hang on your wall with the use of one nail or screw. Don't want to hang it? Check out THIS STAND that I made!

Comment & Rating (1)

(0/1000)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.