DJI Osmo Action 6 Case (+Adventure Bundle) - Free 3D Print Model

Search models, users, collections, and posts

TimoZO

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

P1S

P1P

H2C

H2D

P2S

X1 Carbon

H2D Pro

H2S

X1E

X2D

A2L

Version 2 - bigger slot for battery case (+1.5mm each side)

Designer

29.8 h

5 plates

5.0(3)

0.2mm layer, 3 walls, 15% infill

Designer

29.4 h

5 plates

4.2(10)

Open in Bambu Studio

Boost

107

284

337

155

Released

Description

Content has been automatically translated.

Show original

Case for a DJI Osmo Action 6 with Adventure Bundle and other accessories. I have created two versions: one with space for the camera in a diving case and another just for the Action 6. Both versions feature a cutout designed for the respective lens caps. For the diving case, I used the Telesin (Amazon) case, not the original DJI housing. The original DJI Diving Case does NOT fit this case!

Cutouts allow viewing the battery charge levels.

For assembly, 6x M3x35mm cylinder head screws and 6x M3 nuts are required.

If there are any problems, please let me know!

UPDATE:

New print profile with a larger cutout for the charging cradle (battery case).

Comment & Rating (34)

@Baertiga

Hello, quick question, I'm missing the closure when I download everything as a step file... it contains: DJI_Lenscover DJI_Lenscover_2 DJI_Travelcase__Diving_Top_V2 DJI_Travelcase_Bottom_V2 DJI_Travelcase_Diving_Bottom DJI_Travelcase_Top_V2 Could someone send it to me? Please, thank you :)

(Edited)

Show original

@Baertiga

is taken care of I have read in the 3mf file and saved it out of it

Show original

@user_2059603791

Great box. Maybe you can change M3 35mm to more popular in hardware stores 30mm.

The designer has replied

@TimoZO

I will revise it when I have the chance! Thanks for the feedback! :)

Show original

@user_2401711168

Print Profile

0.2mm layer, 3 walls, 15% infill

warped very bad, had to stop printing after 9 hours.

(Edited)

The profile uploader has replied

@thehyperspeed

this looks problem with your filament

(Edited)

@TimoZO

I also had this problem at the beginning, but I was able to solve it by cleaning the print plate and using glue

(Edited)

Show original

@hullepim

do you know if the osmo 4 with adventure bundel will fit?

The designer has replied

@TimoZO

Unfortunately, I cannot say.

Show original

@wm101891

Replying to @TimoZO :

I have the action 5 pro which has the same dimensions as the 4 and the camera area will be slightly larger than the camera itself, which is fine with me. All accessories are the same including the battery hub so as long as your good with the camera area being slightly larger than needed, the rest will fit.

@TimoZO

Replying to @wm101891 :

thanks for the info!

Show original

@noahs_3dprints

Print Profile

Version 2 - bigger slot for battery case (+1.5mm each side)

@flockerl

hi :) do you know whether the case for the dji mic mini fits inside the middle compartment or not?

The designer has replied

@TimoZO

Hi, unfortunately I don't know the size of the case, but I have entered all relevant dimensions in a drawing derivation of the lower part. Maybe that helps you answer your question. :)

Show original

@flockerl

Replying to @TimoZO :

thank you very much for the info! unfortunately it doesn't fit by 7mm- so quite a lot :(

@TimoZO

Replying to @flockerl :

@flockerl can you give me the dimensions, then I will construct the case in it and upload the data as an alternative ;)

Show original

@nickjones09

Hi the case is great, however the DJI diving housing doesn't fit

The designer has replied

@TimoZO

Thanks for the info, I've added it to the description that the DJI case does not fit inside

Show original

@SRHS

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Great model!! I wish the regular case would be able to fit Telesin Aliminum protection case tho. Otherwise, both are great!

(Edited)

The profile uploader has replied

@TimoZO

Thank you!

@AtlasPrinting

just whana say, I ain't printed this yet, as I need to check if the diving is compatible with my small rig case, but this is absolutely amazing work!

@user_338235382

Print Profile

Version 2 - bigger slot for battery case (+1.5mm each side)

Fits prefectly

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.