Flocare Infinity tube feeding pump holder

This lightweight holder can hold the Nutricia Flocare Inifinity tube feeding pump (version II) and fits in a very small backpack!

It is the result from long iteration process, but with this version we were satisfied, so I would like to share it with you.

In this video you can see how it works.

• Separate bottle holder for round 130ml or 250ml bottles with purple lid which can be firmly slid into the pump holder and stays in place. I designed it this way, to be able to change for other bottle holders later, but I haven't made any other design yet.
• No screw needed anymore to fixate the pump! A hole for this screw is added, just in case you might want to use it.
• Only 152 grams!
• It fits this very small childrens backpack. https://www.decathlon.nl/p/wandelrugzak-mh100-voor-kinderen-2-tot-6-jaar-5-liter/308368/c364c364m8588848. With the 250ml bottle, it just fits. This has the advantage, that when opening the bag while it is hanging on the hook, the bottle is somewhat stuck in the bag, and it doesn't fall out.
• The pumpset can be replaced while the pump is in the holder. It does require some practice. It's also very easy to push the pump out when replacing the pumpset, because no screw is needed.
• The bottle can be easily taken out and unscrewed from the tube, to replace it with a new bottle, without spilling.
• The tube line does not kink, so no flow errors anymore!
• The pump is laying flat. This is working perfectly fine. It makes it easier to read the screen when the pump is low, and it makes the holder stable.

I printed it in PETG on a P1S with 0,16mm layer height, 3 walls and special support settings (uploaded print profile)

If you have any request to change this design, get in contact with me via makerworld, and I'll see what I can do!