Mis XV Quinceañera LED Neon Sign

🇬🇧 Assembly & Wiring Instructions

• Joining the Parts: Since the sign is large, it is printed in parts. You must glue them together using cyanoacrylate (Super Glue).
• Reinforcement (Pro Tip): For long-term durability and structural integrity, I highly recommend using a Hot Stapler (plastic welding kit with metal staples) on the back of the seams. This ensures the sign won't break when handled or transported.
• LED Installation: The design is intended for segmented LED strips. You will need to cut the neon strips to fit each letter curve and solder wires between the segments to connect the circuit. It is not a continuous channel; soldering is required for a clean look.

🇪🇸 Assembly and Electronics Instructions

• Joining Parts: As it is a large sign, it is printed in parts. You must join the pieces using cyanoacrylate (like "La Gotita" or Super Glue).
• Reinforcement (Recommended): To ensure long-term durability and that the sign withstands movement, I recommend implementing a Hot Stapler (hot stapler) on the rear joints. This makes it much firmer than with glue alone.
• LED Installation: The design is intended for cutting neon strips. You will need to cut the strip for each letter segment and solder wires between the parts to provide light continuity. It is not a continuous channel; soldering is required for a neat finish.