Bug-A-Salt Choke with Bug-Beam cutout
Print Profile(1)
Description
I received a Bug-A-Salt AND Bambu A1 for Christmas. First thing I did was see if there were any modifications I could print to improve the handling of the BAS, and sure enough there were!
I also received the OEM Bug-Beam, and all the chokes I found didn't allow for both to be installed, so I've been prototyping making the perfect attachment.
Installation is easy:
1. Take your Bug-Beam off your Bug-A-Salt
2. Insert the clamp part that attaches to the barrel into the choke assembly, it'll snap in with a tiny bit of force
3. Make sure the ON/OFF button is facing the shorter, wider opening side
4. Slide the entire assembly over the Bug-A-Salt barrel and push it back as far as possible, you may have to give it a gentle thwack
5. Give the assembly a gentle twist to make sure the pegs lock into the barrel
6. Tighten down the Bug-Beam screw to clamp it to the barrel
7. Sight your Bug-Beam back in
8. Slaughter some flies!
You can at install the laser at 3, 6, or 9 o'clock.
Choke offers marginal performance advantages and reduces big granules from leaving the focal point
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)