Search models, users, collections, and posts
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
16.5 h
8 plates
Open in Bambu Studio
Boost
3
8
0
0
6
1
Released
Description
Content has been automatically translated.
CLARA LED illuminated name
The letters can be glued together and/or fixed with M4x16 screws and nuts
A 5mm hole is provided for the cable to enter between the letters C and L
Assembly:
- Glue and/or screw the letters together (remember to pass the power cable before assembling E and L)
- Glue the LED strip as you go and pass it through the holes between the letters. Personally, I tightened the letters a bit by bending the strip, and put hot glue to hold it firmly at critical points (I find the adhesive strip doesn't hold very well)
Material list:
- 2.5m LED strip: https://www.aliexpress.com/item/1005009321343937.html?spm=a2g0o.order_list.order_list_main.35.4e995e5bjNgLTF (select model “WS2812B DC5V, Black PCB, IP30 30LEDs, 2.5M”)
- Remote control + Bluetooth receiver: https://www.aliexpress.com/item/1005010137479570.html?spm=a2g0o.order_list.order_list_main.23.4e995e5bjNgLTF (select model "USB With remote")
- 5 x M4x16 screws + nut (optional but recommended for good hold)
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)