Laptop Stand (for small and big Laptops) - Free 3D Print Model

Search models, users, collections, and posts

Matrix

Household>Office

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 30% infill

6.6 h

3 plates

4.0(9)

Open in Bambu Studio

Boost

226

Released

Description

Hey, I designed and built this Laptop stand from scratch, my main goals for this stand were: It should fit every kind of laptop (even my huge RTX A3000 Laptop and MacBook Pro), It should fit on a fairly normal sized build Plate, It should be 100% 3d printed and sturdy. I printed it with a 0.28mm Layer height and a fast profile and it took around 8 hours to print while only consuming ca. 50g of filament around (85ct) due to the honeycomb design. If you have any questions about the design or how to print it feel free to comment it. Happy printing!

Comment & Rating (10)

@Hector_Giraldo

Print Profile

0.2mm layer, 4 walls, 30% infill

soporte perfecto para mi PC. en cuanto a la impresión decir que las uniones les agregue soporte aunque también se pueden asentar en la cama para evitar los soportes.

@DaaJan

Print Profile

0.2mm layer, 4 walls, 30% infill

Second attempt = second failure due to a spaghetti error…

Show original

@user_3798830983

Boosted

Print Profile

0.2mm layer, 4 walls, 30% infill

cross bars appear to not have supports turned on. Once I figured that out they printed flawlessly.

@lucas12gmer

Print Profile

0.2mm layer, 4 walls, 30% infill

Broke all of from the plate complete mess do not print

@David.Brommer

Print Profile

0.2mm layer, 4 walls, 30% infill

ist super geworden

@Clemens.

Print Profile

0.2mm layer, 4 walls, 30% infill

Broken

Show original

@user_3763925086

The middle pieces are rotated weird and only touch the build plate by a tiny amount. I tried printing this twice and it failed both times. I had to rotate them onto the build plate to print properly.