WeeXeeT

cover

IMG_4424.JPEG

IMG_4425.JPEG

IMG_4426.JPEG

IMG_4427.JPEG

IMG_4428.JPEG

plate_1.png

2026-01-08_009db101ca7128.jpeg

<ul><li>Material: PETG (chosen for better durability and resistance)</li><li>Layer Height: 0.12 mm (Fine detail for better ergonomics).</li><li>Wall Loops: 3 (provides necessary strength for the screw holes).</li><li>Infill Density: 35%.</li><li>Infill Pattern: Gyroid (ensures great structural rigidity).</li><li>Components: Includes both left and right handle scales on a single plate.</li></ul>

0.12mm layer, 3 walls, 35% infill

After some time, the knife handle became sticky due to poor material quality. I decided to make a new one that is compatible with the original screws.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Any feedback would be greatly appreciated ;)</boostcontent></boostme>

Knife handle (MTF, Patriot)

ASIA

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models