3D Printed Window Exhaust Venting Kit (for Casement and Sliding Windows)

3D Printer Exhaust Window Venting Kit (for Casement and Sliding Windows)

Hello 3D printing enthusiasts, are you always bothered by the headache-inducing resin smell and PLA fumes during printing? Does indoor ventilation fail to dissipate them, and are you worried about dust entering the machine if you open a window? This window exhaust kit is designed to solve exactly that problem – it directly channels the exhaust gas from your 3D printer outdoors through a duct, resolving indoor exhaust issues at the source!

🔍 Compatible Window Types

Tested and compatible with casement windows (inward/outward opening/tilt-and-turn) and horizontal sliding windows. Whether it's common thermal break aluminum windows or plastic steel windows, it can be directly clipped into the gap between the glass and the window frame, eliminating concerns about window type compatibility.

🖨️ Effortless Printing

The model has been optimized through multiple tests, achieving a 100% printing success rate! No supports required, no parameter modification needed, even beginners can print it successfully in one go. Both PLA and ABS filament can be used, making it worry-free and effortless.
 

🛠️ Super Easy Installation
Snap-on design, no drilling or adhesive needed; simply clip it into the window gap to secure it, and installation is complete in one minute. Secure with M4x16 self-tapping screws; if no screws are available, 502 super glue can be used for fixation. The interface is compatible with 80/100mm aluminum foil flexible ducts, allowing connection to the exhaust ports of most desktop 3D printers on the market.

It is recommended to cut open a takeout bag and use double-sided tape to create a gap seal. This effectively addresses the issue of indoor temperature drop, allowing heat retention while still exhausting fumes!

✨ Usage Effect

The kit fits tightly with the window gap, preventing exhaust gas from flowing back in. During printing, you will no longer smell pungent odors indoors. This ensures fresh air in the printing environment and avoids the health impact of exhaust gases.

Just download and print the model to use it, solving 3D printing exhaust issues at a low cost. It is recommended to save it for future use~

If you like my model, please help me click the free boost below, thank you!