Search models, users, collections, and posts

Asus Bezel Free Kit Mount for LG 32GS85QX-B

Print Profile(1)

All
A1
H2C
X2D
A2L

0.2mm layer, 3 walls, 15% infill
0.2mm layer, 3 walls, 15% infill
Designer
2.9 h
1 plate
5.0(1)

Open in Bambu Studio
Boost
12
41
4
1
51
13
Released 

Description

Content has been automatically translated.
Show original

Mount with a 60-degree angle for the Asus Bezel Free Kit, specifically adapted for a 32-inch LG monitor (32GS85QX-B or same housing)
For a triple screen setup, the mount must be printed twice.

Comment & Rating (4)

(0/1000)

Hey so I have your same monitors 32inch Ultragear LGs But I am using a different 'kit', the lens is 47cm wide, unfortunately the kit I bought doesn't fit the monitors, so I'd like to use your parts instead, but for that I'd need 2 things The slit of where the lens goes to be a hole essentially (so the lens can go through) and then have 2 more m3.5 holes (so I can thread them) to tighten the lens in place I attach some pictures as I managed to modify the top part with some negative parts on the slicer, but the bottom part would be too big and cover part of the monitor, which isn't particularly necessary as I have a longer lens Do you think you could modify the bottom part to have the same features? Space for the lens to go through the bottom + holes for the screws to tighten the lens in place + less 'chunky' piece? my bottom bezel is 20mm Thanks in advance if you are able to this would help a ton
The designer has replied
0
Reply
Hello, I am just reading your message now. Have you already solved the problem? If it is not yet solved. Should the adapter be open at the top and bottom? How much shorter should the front be? The M3.5 holes are no problem. Best regards, Tim
Show original
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
The profile uploader has replied
0
Reply
Vielen Dank ☺️
0
Reply
No more