Molle Paper Towel Mount - BearToad Molle System

Molle Paper Towel Mount - BearToad EZ Molle System

Clean up shouldn't be a chore. Whether you’re at the campsite, in the shop, or at the grill, the BearToad EZ Molle Paper Towel Mount puts your shop towels exactly where you need them.

Designed to hold standard and "select-a-size" rolls, this two-piece mounting system provides a rock-solid hold that won't let your paper towels unspool while you’re bouncing down a trail or working in the garage.

The BearToad Difference

Most paper towel holders for Molle panels are either flimsy wire or require permanent hardware. We wanted a solution that was BearToad Tough. Our system uses two independent EZ-Mount brackets, allowing you to customize the width to fit any roll size—from standard kitchen towels to heavy-duty industrial blue shop rolls.

Features

• Universal Fit: The two-piece "independent arm" design means you aren't limited by roll width.
• Tension-Fit Arms: Engineered with just enough flex to keep the roll from "freewheeling" and unrolling unnecessarily.
• Rapid Deployment: Like all BearToad EZ gear, it snaps into your Molle panel in seconds without tools.
• Overland Ready: High-strength mounting lugs ensure the arms won't pop off during high-vibration vehicle travel.
• Bambu Lab Optimized: Tested and tuned for the P and X series; fits perfectly on the A1 Mini.

Print Settings

To ensure the arms have the right amount of spring tension and durability:

• Material: PETG is highly recommended (provides the necessary "spring" without being brittle like PLA).
• Wall Loops: 4 (Critical for the tension strength of the arms).
• Infill: 25% (Gyroid).
• Orientation: Print on its side for maximum layer strength across the mounting lugs.
• Supports: Minimal supports may be needed for the lug overhangs depending on your bridging settings.

What’s Included

• 2x BearToad Molle Paper Towel Mounts
• Requires
  • 2 x HEX Nuts https://amzn.to/4p6Wkex (Also Found at Home Depot)
  • 2 x HEX Bolts https://amzn.to/4p6Wkex (Also Found at Home Depot)
  • 2 x Anchors from the EZ Molle System - https://makerworld.com/en/models/2164592 
  • 2 x Thumb Screws from the EZ Molle System - https://makerworld.com/en/models/2164592 

Installation

1. Snap the first arm into your Molle panel at the desired height.
2. Slide your paper towel roll onto the arm.
3. Position the second arm on the panel, press it into the roll for a snug fit, and snap it into the Molle webbing.
4. Clean up and get back to work.

Stop chasing your paper towels. Welcome to the BearToad ecosystem.

Expanding your setup? Check out our Molle Storage Bin and Light Duty Hook for the ultimate organized workspace!

Feel Like helping out - Buy me a Coffee