P1S / X1C / P2S Front Door Tool Panel

This project exists for one simple reason:
I kept losing my filament cutters and deburring tool.

With no free space on the sides of the printer, the front door turned out to be the perfect solution.
Instead of digging through drawers mid-print, this front-mounted SKÅDIS panel keeps your most-used tools visible, organized, and always within reach.

What it is

A front-mounted, IKEA SKÅDIS–compatible organizer panel designed specifically for the Bambu Lab P1S. Thanks to the great cooperation with @Nootes and @Pract, we were able to confirm compatibility with the X1C and create a new model dedicated to the P2S.

The model combines:

• Decorative hinge screw covers
• A SKÅDIS-style perforated panel (3-slot wide)

It mounts directly to the existing door hinge screws, making the installation clean, reversible, and completely non-invasive.

Height variants included

To match different needs and setups, the model is available in few versions:

For P1S/X1C:

• FULL SKÅDIS – maximum SKÅDIS area for multiple tools and accessories 
• SEMI - half SKÅDIS half Solid
• Half – balanced size for everyday essentials
• Short – compact version for minimal or lightweight setups

For P2S:

• FULL SKÅDIS P2S - maximum SKÅDIS area for multiple tools and accessories for P2S
• Half – balanced size for everyday essentials
• Short – compact version for minimal or lightweight setups

Community-first IKEA SKÅDIS compatibility

The panel is fully compatible with IKEA SKÅDIS accessories, which means you are not limited to a closed system.

You can freely use and print:

• hooks
• clips
• tool holders
• organizers

created by other makers in the community.

This model is designed as a perfect base for community-driven extensions — mix, match, and expand as needed.

Optional magnetic support

Behind each hinge screw cover there is a dedicated slot for magnets, improving grip and overall stability.

• 2 magnets per screw cover
• Up to 4 magnets total
• Supports round magnets up to 10×3 mm
• Smaller magnets also work well

Magnets are optional — the panel remains stable even without them.

Printer compatibility

• Bambu Lab P1S (designed and tested)
• Bambu Lab X1C - tested and confirmed by @Nootes
• Bambu Lab P2S - tested and confirmed by @PracticalBullDog333
   

H2D owners are welcome to test and share feedback to help confirm compatibility for the community. Anyone who confirms compatibility with a photo will be credited in the project description with a link to their profile.

☕ If you like this model, you can support me here:

🛠️Before You Start Printing

Before printing, give the bed a quick clean 🧽 — good adhesion = better first layer and accurate geometry.

Use dry filament (wet filament loves to pop, string, and ruin dimensions).

When using my MakerWorld profiles, make sure the selected material matches what you’re actually printing. Different materials shrink and behave differently — the wrong profile can mean wrong dimensions.

Also, my STL files are designed and dimensioned for PLA. If you print them in PETG, you may need to slightly rescale the model to compensate for different shrinkage.

Clean bed. Dry filament. Correct material. Done 😄