Purge Bin ( Poop bucket ) shoot P1S X1 X1C P1P P2S - Free 3D Print Model

Search models, users, collections, and posts

Brithawkes

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

14.7 h

1 plate

4.8(492)

PLA Speed Optimized Settings

6.5 h

1 plate

4.9(144)

Open in Bambu Studio

Boost

739

1823

738

319

7.8 k

4 k

Released

Description

Hi All this is my version of a poop shoot for my new P1S fits well and is work great so far.

I have added space to put magnets on the backside if you wish but not really needed as free standing. I used the magnet which came with the printer for the scraper as was not going to use them for it.

and added the designs on the faces to aid in keeping the side straight but also looks cool :)

this is v1 if i find later i wish to change i will update or make a new one. also if you would like me to alter in anyway please let me know.

all the best and happy printing.

this should work for the P2S as well but it has not been tested as of yet.

Membership

Considering selling your prints? want to sell some of my designs why not join my membership this will give you the right to sell you 3D prints of my designs while you're a member

Join

Boost Me (for free)

I do hope you find this useful if you do please consider boosting me it go's a long way to aiding my 3D addiction 😉😂

Comment & Rating (738)

@user_3359085319

Very good print. Fits well and catches filament effectively. I ran out of filament halfway through, so thats why mine is multi colored

The designer has replied

@Brithawkes

Nice print thanks for sharing

@user_2897903115

I kinda like the two tone honestly. Looks sharp. Just started printing mine

@ackie

Print Profile

0.2mm layer, 3 walls, 15% infill

perfect.

The profile uploader has replied

@Brithawkes

very nice 👌

@Jo90

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed with Bambu black PETG. Great and simple print. Does an excellent job at collecting poop. no magnet required.

The profile uploader has replied

@Brithawkes

Great print thanks for sharing 👍

@nikkolaus

Boosted

Used some of the free/included PLA Basic from Bambu Labs and it worked out great.

The designer has replied

@Brithawkes

looks great thanks for sharing 👍

@captawsome224

Print Profile

0.2mm layer, 3 walls, 15% infill

Turned out great, now my poop’s won’t hit the floor.

The profile uploader has replied

@Brithawkes

looks great thanks for sharing 👍

@b_ferg

Print Profile

0.2mm layer, 3 walls, 15% infill

This is my second print I ever made after a benchy. It came out really nice and fits my P1S perfectly!

The profile uploader has replied

@Brithawkes

Glad you like it thanks for sharing and happy printing

@elsenor221

first of all: Thank you for the great design. this was my 2nd print ever on my new P2S. I am new in 3D printing - the print has minor errors and here are the walls very thin. what went wrong? iike to understand the reasons to improve my skills. the bin will be used, even with these errors. I uses Bambulab PLA Matte black - I love the colour and the finish!

The designer has replied

@Brithawkes

its hard to tail what has happened it almost looks like it printed to fast and at the wrong layer heights the walls are not meant to be to think but should be more than strong enough. but it doesn't look as it should. if you printed with the set programme from this site I'm not sure why this has happened sorry.

@elsenor221

Thanks! I've loaded the file just via Bambu Mobile. Didn't used Bambu studio right now. Will install it soon and check what setting were used.

@user_1202526230

Print Profile

0.2mm layer, 3 walls, 15% infill

fits perfectly!

The profile uploader has replied

@Brithawkes

Looks great thanks for sharing

@lirex

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Great design, thank you! Easy to print, no supports, sleek and stylish.

The profile uploader has replied

@Brithawkes

looks great thanks for sharing 👍

@whiskeyfires

Print Profile

0.2mm layer, 3 walls, 15% infill

Jams up on multicolor large prints and needs the initial chute cleared but otherwise works great and looks good 👍

@tkjeldsen

Boosted

I had same problem

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.