Modern geometric succulent plant pot - Free 3D Print Model

Search models, users, collections, and posts

SchulteGeileTechnik

Household>Decor

IP Report

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1mini, Only pots without holes + inner pot, 0.16mm layer, 2 walls, 10% infill

9.9 h

4 plates

4.9(363)

(only 3rd pot) 0.16mm layer, 3 walls, 10% infill

2.1 h

1 plate

5.0(102)

Separate plates fixed supports, 3 walls, 5% infill

18.8 h

8 plates

4.9(115)

Open in Bambu Studio

Boost

5182

14815

715

406

14.1 k

7.1 k

Released

Description

Please keep in mind that they are under a NON COMMERCIAL license, so don't sell the files or prints using this design.

I designed three geometric plant pots for some succulents.
In addition, I created an inside pot for each planter with some holes in their bottom and a little offset from the ground so that excess water can escape.

They were designed to fit small succulents with an inside width of ~60 to ~65 mm.
They are all around the same height (roughly 60mm from the ground).

I would love to see your prints, so if you make one be sure to post a picture under makes.
If you like my designs or have any questions leave a comment and maybe consider a little tip.

I also added an STL file for the base. Mine is made of concrete and not 3d printed, but I modeled it anyway to find out how the planters would look on it.
It is about 260 mm long so maybe you have to scale it down a little bit to make it fit on your print bed.

You may also find some of my files on thingiverse and printables. I made my printables account to get away from thingiverse, but since I heard a lot of good things about MakerWorld, I decided to upload on here as well. I have access to a P1P at work and a friend of mine owns an A1, so I may be able to add some Bambuslicer-specific files in the future as well.