Blanton’s Bourbon HueForge Wall Art (240×160mm)

All Compatible Lightbox Frames & Mounts Available Here!
 

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues)         Magnets (for optional mounts)

Recommended LED Light Strips     Battery Powered LED Light Strips     Double Sided Tape for Lens: Optional

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

Bring classic bourbon culture to your wall with this Blanton’s Bourbon Whiskey HueForge wall art, designed specifically for multi-color 3D printing.

This model captures a warm, vintage still-life scene featuring the iconic Blanton’s bottle with horse stopper, a Glencairn-style glass, and a cigar resting in an ashtray. The artwork is optimized for HueForge color blending, producing depth, contrast, and rich tones without the need for painting.

Print Details

• Overall Size: 240 × 160 mm
• Bambu PLA Colors: Black, Bronze, Gold and White
• Orientation: Portrait
• Designed For: HueForge / multi-color filament printing
• Style: Vintage, whiskey-themed wall art
• Use Case: Bar décor, man cave, bourbon room, gift print

This model prints flat and is ideal for framing, mounting, or displaying as a standalone wall piece. Filament color choices will strongly influence the final look — warm ambers, browns, and creams are recommended for best results.

⚠️ Note: This is a fan-made artistic model intended for personal use and display.

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.