Ultimate Handled Wheel Clicker (Print in Place)

The Ultimate Handled Wheel Clicker builds on the already perfected concept of the basic wheel clicker. It adds a larger wheel with a textured hole through the center, allowing you to put this fidget around your finger, like a ring. I added a triangular handle with textured bumps for a more comfortable experience. This fidget takes only 9.4 grams of filament and less than 34 minutes making it a perfect print for any fidget lover.

Printing Instructions:

1. Prepare the Print Bed
   • Clean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion.
   • Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.
      
2. Download the Print Profile
   • Send the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.
      
3. Select Your Printing Options
   • Choose your filament type and color.
   • Select your print bed type (e.g., textured or smooth).
   • Confirm your printer settings, ideally for a Bambu Lab printer.
      
4. Start Printing
   • Begin the print job. No supports are necessary.