Print Profile(1)
Description
CAUTION!
Always hold the suction device quite straight, as water can be sucked into the vacuum cleaner if it tilts or the water bottle is too full.
Adapter for vacuum cleaners/handheld vacuum cleaners through which liquids can be sucked into a commercially available bottle with a 28/410 thread.
Side sliders to adjust the suction intensity.
Use the seal from the bottle cap as a gasket (a hole must be cut into it)
The sliders have some play when printing but are a bit stiff after printing. It is best to insert an Allen key or similar through the open hole, let it rest, and press gently, do not press loosely on the handle, as it could break otherwise.
I decided to use an intermediate adapter because there are too many different vacuum cleaners; the wet vacuum has a 22mm hole where your own adapters for the suitable vacuum cleaner can be inserted. It is best to create the adapter 10mm deep.
Included is an adapter for a 26.5mm diameter
Documentation (3)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)