Rudo Surebrec - Gachiakuta
Print Profile(1)
Description
Free for personal printing use only.
Exclusive projects and commercial license available at Patreon.com/StrataPrints — your support keeps new designs coming! Check out the Zanka print below, available EXCLUSIVELY on Patreon!
Project: Rudo Graffiti.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 187.98x235mm in size
You may print at higher layer heights below the Base Thickness of 1.44mm
The Max allowed Thickness is 3.6mm and the Actual Thickness is 3.2mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#616364 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#8b9398 PLA BambuLab Basic Gray Transmission Distance: 0.1
#e4bd68 PLA BambuLab Basic Gold Transmission Distance: 3
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #20 (1.68mm) swap to Dark Gray
At layer #24 (2mm) swap to Red
At layer #29 (2.4mm) swap to Gray
At layer #32 (2.64mm) swap to Gold
At layer #35 (2.88mm) swap to Ivory White
This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
At layer #41 (3.36mm) swap to Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)