CUTTLEFISH BONE HOLDER SALAD BISCUIT BIRD CAGE
Print Profile(5)
Description
Simple print of a holder for cuttlebone, biscuits, salad, etc. for our feathered friends. Little material, few easily removable supports, two versions of perches / rests (one with a length of 7 cm and one with a length of 17 cm). The cage anchors are arranged for 3, but only 2 are sufficient (with a 7 mm coupling key, difficult to remove after assembly for the safety of the pets).
Pay attention to the various print plates (single + decomposed parts).
Removing the support from the perch is very simple: just use a screwdriver and slide:
Assembly is very easy:
Removing the perches is very easy to change them with those of different lengths:
Print Time: approx. 1:35 h
Material Consumed: approx. 33 g
Material Used: PLA Silk Magic blue and purple (very nice and layers are less visible) + Test with PLA Basic Green (appreciable).
Supports: Tree supports mode (standard) placed only where strictly necessary.
Support Removal: low difficulty, but still pay attention
Layer Height: 0.16 mm but it still presents with appreciable detail and is truly worthwhile
Infill Density: 50%, but for its use and size / geometries it withstands easily
Boost Me (for free)
If you like my creations, give me a Boost, follow me, and ask me what you want!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)