Bob Newby - Stranger Things - Hueforge

Remember Bob? RIP. This picture is from the comic credits in s5 finale. Enjoy!

This is not a flat print. Using HueForge, the image is translated into carefully layered filament, where color, depth, and light work together to create a dramatic, almost painted effect. Subtle height changes across the model add texture and contrast, giving Eddie’s silhouette, guitar contours, and stormy background a striking sense of motion and intensity when viewed in person.

I tried to make this as accessible as possible using only 4 basic colors.

You can ignore any floating region errors.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 153x108.73mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #2c4160 PLA eSun ePLA-Lite Grey  Transmission Distance: 0.8
    #62656a PLA Kingroon Basic PLA Gray  Transmission Distance: 1.9
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to ePLA-Lite Grey
    At layer #14 (1.2mm) swap to Basic PLA Gray
    At layer #19 (1.6mm) swap to White for the rest.