DROP BMR1 Speaker Monitor Mounts

I wanted to get some desk space back by putting the DROP BMR1 speakers on top of my 45'' LG OLED monitor. 

I was initially inspired by https://www.printables.com/model/563788-drop-bmr1-speaker-monitor-mount/ but ultimately used nothing from that design. 

How to mount: You can use the included M4 screws that came with the BMR1 to attach it at the center. The mount includes holes at top and bottom so that you can orient the speaker whichever way you'd like. Then apply 3M VHB to the monitor mounting surface and stick it on. 

Versions: There are 6 plates for the different versions.  
- I included 2 versions that should roughly match the 800R curved monitors for top and bottom mounting. One with a 7.5 degree tilt and one without. Downward tilt if mounting on top and upward tilt if mounting on bottom. 

- Also included is a version where the monitor mounting surface is flat, if you want to mount to the sides or a monitor without curve. 

- Also are versions where there is a hole you can use to stuff cable, but this takes longer to print.