Kids Jeep Stereo Delete

The kid's jeep onboard speaker is pretty weak and music cannot go louder than the operation of the jeep. Instead of amplifying it, I figured I would “delete” it and replace it with a magnetic speaker off of Amazon.

You can print in PETG (recommended), but this one is PLA+ Tough.

See Pics

gently pull out the stock stereo. They have 4 clips (2 on each end). Small flat blade screwdrivers will help.

Do not unplug anything!

Rock the stock stereo into the dash.

There are two types of clips on the stereo plate. Ensure the rounded clips are on the bottom.

Gently rock the new plate into the stereo hole.  It's a tight fit on purpose. Attach the sticky back ring the speaker comes with.

For FYI, I went with Doogee and am fairly pleased with it. The reviews are pretty spot on.