Ultimate64 / CU64 / console x Breadbin
Print Profile(1)
Description
this is a console for the barebin , no glue no modification to che chassis , simply put the bracket into the hole nearby the crt .
parts :
num6 screws m2.5 x 10 mm
num1 4 pin connector https://www.amazon.it/dp/B0CBWZNP6Z?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
num1 4 pin cable https://www.amazon.it/dp/B0CSZ7ZRDC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
num 3 buttons https://www.amazon.it/dp/B0DQPKQMLV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
num 3 wire connector red https://www.amazon.it/dp/B095PGVNF8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
3 buttons ground shorted and connected to the ground pin ( first of four sitting in front of MB )
print :
PETG , use support and look at the picture how dispose the pieces .
the connector for the original barebin (1982) is different due to the shape of the hole that is higher than the new one . the connector for that model is :
-connettore_breadbin_1982.stl
video here
https://youtu.be/Hz429b2czn8?si=k9-xTt_Vy0VxnPtn
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)