90 Degrees Sliding Drive Tray

90 Degrees Sliding Drive Tray

This tray can be installed on the bottom of your PC Case (for example, a Pop Air) or in other locations where access is limited. It is intended for those situations where you can't easily access both sides of the HDD itself to (un)install it.

In this design the drive tray ‘slides’ on to a base plate and is fixed in place by three bolts that stay accessible from the side.

Pop Air / Other PCs with a large Video Card

If you have a larger video card and still want to install 2 drives and you need a little more space you can use the ‘slimmed’ versions, which are about 8 mm lower.

See the included .zip file for all individual files and instructions.

Materials

- PETG or ABS. I would not use PLA.
- 3 inserts per base plate - currently M4x10 OD5.8, but if you need another size then drop me a line and I'll add a variant

- some rubber grommets