Orbital Paint Storm Multi-Bottle Paint Mix 125mm

Tired of shaking your paints by hand? This adapter turns your 125mm Random Orbital Sander into a high-powered paint shaker! Version 2 has been optimized for better balance and durability.

Capacity:

This mixer is a multi-talent and holds:

• 8x Army Painter (or similar dropper bottles)
• 16x Citadel Base / Layer pots
• 8x Citadel Contrast pots

Required Hardware:

To finish this tool, you will need:

1. Adhesive: A strong glue (like "Kraftprotz" or heavy-duty epoxy).
2. Hook & Loop surface: A 125mm Velcro interface pad or a 125mm sanding disc to be glued to the bottom.
3. Rubber Bands: Choose strong bands that fit around the hooks to secure the lid.

⚠️ IMPORTANT - READ BEFORE ASSEMBLY:

• Curing Time: The adhesive MUST be fully cured before the first use! Do not rush this, or the parts might fly off during operation.
• Version Note: The photos show Version 1. The file provided here is the improved Version 2.
• Fitment Check: Test your rubber bands for proper tension before gluing everything together. They are meant to hold the lid in place if desired.

🚀 How to use (Safety Instructions):

1. Load your paints: Due to centrifugal force, it works even without the lid, but using the lid with rubber bands is recommended for maximum safety.
2. Speed Setting: Start at the lowest setting! Do NOT use at maximum speed.
3. The Sweet Spot: Find the speed where the rotation turns into a strong eccentric vibration.
4. Technique: Hold the sander firmly with both hands. Tilt the sander slightly (about 10 degrees) to one side to maximize the mixing effect.

DISCLAIMER: Use at your own risk. I am not responsible for any damage to your paints or sander. Always wear eye protection and start slow!

Standard Bambu PETG 

15% Infill