Size Adjustable Wire spool 20AWG - 30AWG

Needed some wire spools for the random bits of electronics wire i have, none of the models I've seen store the wire nicely. This spool has a bunch of special features

• Standard 1/4-inch (6.35mm) hex cutout allowing you do use a drill bit to wind the spool easily without any other adapters, but dont worry about it spinning weird on a regular rod, it also has a circle 6.50mm opening if you want to let it free spin on a rod

   

• A spot to tuck the wire in and an opening which allows the tucked wire to fit right next to another spool with no gap, This lets it look nice on the shelf, be stacked on top of eachother,  and stops the wire from unraveling
•  

• Hole in the center to tuck and hold the start while winding

   

• Simple threaded design, no glue or inserts needed, you can also increase or decrease the size with optional adapters, which double the size of the spool for thicker or more wire or remove for less wire as you use it up. Prints flat for optimal bed adhesion and no supports scarring.

Spools comfily fits up to about 5meters 20awg wire with the thickness increase adapter, just wrap the wire on in the direction of the small arrows and thread it through the hole when done and tuck it back in to keep it clean and stop the wire unraveling!

These work great by themselves or with Skadis shelf adapter you can find here:

https://makerworld.com/en/models/2197264-skadis-adjustable-spool-holder#profileId-2386551

(This model is a bit more difficult, so read before printing if you want to match it)