Search models, users, collections, and posts
iPad mini 3 bumper case with grippy sides
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 15% infill, 2 infill lines gyroid
Designer
5.4 h
2 plates
Open in Bambu Studio
Boost
5
5
0
0
12
7
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Bambu Filaments
Select all
Description
I wanted to have a case for my iPad Mini 3 that I use mostly for RPG and wargaming handbooks. So it needs to withstand throwing into a bag, reading on a bus and at the table and sometimes being bumped off that table.
This is 4-part design (top and bottom parts and the smaller parts that go over and under the screen and actually hold the iPad in place securely). To assemble you're gonna need some M3x12 (or longer) metric screws and M3 hex nuts. 8 of each is perfect, 4 of each (2 on the top and 2 on the bottom part) is enough.
Because of this 4-parts design it can be printed on A1 mini table.
I printed in PETG.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)