Jury-Rigged Boomstick | Deep Rock Galactic

This is my take on Scout's Shotgun for Deep Rock Galactic, the Jury-RiggedRigged Boomstick! I'm really happy with how this one came out. I printed mine at 100% scale. No external parts should be required to assemble this, besides maybe some superglue for the looser parts and a mallet to knock in the axle. 

The axle is a very tight fit, and it required a lot of hammering for me to get it in place. However, this is necessary, since the shotgun stays closed through friction. I would not recommend scaling down the axle unless you are having severe problems.

The only other part I had trouble getting into place was the triggers. I scaled mine to 95% to make the part fit. I don't know what about this part specifically causes this problem, but the part kept coming out as too long compared to the hole it's meant to go into. Scaling fixed the issue easily.

The gif below shows how to assemble the shotgun. Most parts fit in neatly and may need some convincing with a hammer. The only parts that I had to superglue together were the shotgun shells, as well as the connection between the receiver and the handle.