Pez Stands (non-vintage dispensers with no feet)

These are stands for Valentines Day Hearts, R2 Trucks, and any foot-less non-vintage Pez.  All the feet and display rails I've ever purchased at conventions had a multitude of issues, all of which I think I resolved in this design:
 

• These are for non-vintage dispensers (the holes are slightly larger to accommodate the larger spine for the modern dispenser design).  

• They're set at a 45 degree angle to maximize display space (this is specific to the Hearts).

• They're individual blocks that dovetail together so you can customize the length you need based on your personal display case.  Print a left, right, and however many centers you need to create a row in the length you need (each block will take up roughly 1.5 inches).

Plate 01 contains stands if you want LEFT-facing dispensers, and Plate 02 contains stands if you want RIGHT-facing dispensers.

I placed the left, center, and right pieces onto Plates 01 and 02.  Just copy and paste them over in however many duplications you need onto Plate 04 and print from there (this way you don't have to fish the “originals" out of a multi-object print).  Use the auto-arrange plate feature in Bambu Studio to maximize the number you can print at once.

Plate 03 contains a display stadium/rails designed to be used in combination with these stands.  Instead of the clip for Pez with feet, it contains a small ridge.  It measures 11 inches wide by 7.5 inches tall.

Please see my other Pez related printables in my Profile.