Ultimate Spiral Spring Flicker (Print in Place) - Free 3D Print Model

Search models, users, collections, and posts

AbyssalCactus

Toys & Games>Other Toys & Games

IP Report

Print Profile(3)

All

H2C

P1P

X1E

P2S

H2S

H2D

X1 Carbon

A1 mini

P1S

H2D Pro

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

46 min

1 plate

4.7(55)

0.16mm layer, 2 walls, 15% infill

58 min

1 plate

5.0(1)

0.16mm layer, 2 walls, 5% infill [PETG]

48 min

1 plate

Open in Bambu Studio

Boost

335

824

1.3 k

1.1 k

Released

Bill of Materials

Bambu Filaments

Select all

Bambu Green (10501) / Filament with spool / 1kg

PLA Basic

Description

This fidget toy uses a spiral spring and a lever that are connected by spur gears to make the lever spring back when you flick it. The model was designed with carefully tested clearances and other tricks to make it fully print in place. This allows you to fidget right off of the build plate. Requiring only 46 minutes and 11.64 grams to print, this is a great little toy for anyone who enjoys fidgeting.

Boost Me (for free)

If you like this model, please consider boosting it! It helps out a ton :)

Membership

Want to sell my 3D printed fidget toys? Become part of my Commercial License Membership program!

Join

Printing Instructions:

Prepare the Print Bed
- Clean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion.A
- Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.
Download the Print Profile
- Send the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.
Select Your Printing Options
- Choose your filament type and color.
- Select your print bed type (e.g., textured or smooth).
- Confirm your printer settings, ideally for a Bambu Lab printer.
Start Printing
- Begin the print job. No supports are necessary.

spiral spring clicker

Comment & Rating (78)

@Wenzo

Print Profile

0.16mm layer, 2 walls, 15% infill

failed to print six times

@Riggatonee

glue

@Parallel_guy

What printer do you have?

@Parallel_guy

did other models also fail

Show original

@Wobogong

Awesome! I will have to print a lot of things soon 😬

The designer has replied

@AbyssalCactus

lol, thank you :)

@Wobogong

Replying to @AbyssalCactus :

yep! :)

@Davethetank

when you go to print you can make more copies that one by pressing the + (Bambu handy)

@CelShader

Print Profile

0.16mm layer, 2 walls, 15% infill

the kids like them!

@keithbigmac

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

This is up there with the extreme lever switch as my favorite yet 👍

@corey2002

Print Profile

0.16mm layer, 2 walls, 15% infill

This has quickly become one of my favourite fidgets. If you lift the spring, and move the lever, you can add or remove tension to make it flick really quickly, or move the lever to center and just toggle it back and forth

@OLOX

Print Profile

0.16mm layer, 2 walls, 15% infill

Works great

@user_795136947

Print Profile

0.16mm layer, 2 walls, 15% infill

@Cylly

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_2865219243

can you make one of these fidgets just instead of the lever being on the side it is in the middle? that would really be amazing!! and maybe make the spring a bit stronger so it is more of a snappy feel!! thank you!!

(Edited)

@corey2002

If you lift the spring, you can release and move the lever to center, or wind the sping a bit to add tension

@user_2865219243

Replying to @corey2002 :

thank you

@rcalkinspx

Print Profile

0.16mm layer, 2 walls, 15% infill

doesn’t have a very good clicking sound, and not that satisfying

The profile uploader has replied

@AbyssalCactus

it is not meant to click

(Edited)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.