Ornamental Nutcracker Over 24 inches Tall - Free 3D Print Model

Search models, users, collections, and posts

mocodroid

Household>Festivities

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm, 3 walls, 10% Infill, Brims on tall parts

37.7 h

12 plates

4.9(67)

150% Scale - 3FT tall

77.2 h

14 plates

5.0(32)

Including the optional Halbred and a different color scheme

40.5 h

15 plates

5.0(31)

3' w round base, boots to fill with sand. Strong PETG

102.9 h

16 plates

Open in Bambu Studio

Boost

832

1829

213

241

1.9 k

602

Released

Description

Nutcracker over 24 inches tall printed on Prusa Mini+.

Printed with PLA at .2 mm layer height 15% infill (I like gyroid), 2 perimeters and .4 nozzle size. No supports required (the head printed fine upside down without supports). Parts are marked for the respective places on the model. The only parts that you need 2 of are the hand, arm, leg and boot. Head and hat are hollow. I used contact cement to glue everything together. Eyes are a 3 parts object ( eye, Iris and pupil ) and the mouth 2 parts ( teeth and lips ). There is a Left eye and a Right eye parts, top mouth, top teeth and lower mouth and lower teeth. All the parts are printed with the flat side facing the printing bed. Head, hat, arm and hand are printed upside down. You can do layer color change to print some of the pieces in two colors. You might need to sand a bit the hole for the Jaw pin. If you have any questions regarding the model send me a message. I don't now if the tolerances will work if you scale the model up or down, if they do please let me know in the comments section.

Happy Holidays!!!