no step, no gap, echo dot 3rd gen wall mount

■echo dot holder with no steps or gaps

I searched for many echo dot holders, but I couldn't find a design that had no gaps with the wall or a thin design, so I decided to design one myself

The wiring of the power cord for compact installation is also included in the design

■Design Features

• The echo dot body and power adapter are flat with no steps
• No gap with the wall
• Specifically designed for Panasonic Cosmo Series Wide 21 outlets (Custom design for Panasonic Outlets/Sockets)
• Compatible with echo dot 3rd generation

■Installation Method

1. Enable support and print the model, then remove the supports
2. Store the power adapter in the model, then route the power cord
3. Route the power cord so it doesn't overlap (Please refer to the attached photos for wiring so that the power cords do not cross)
4. Connect the power cord to the echo dot
5. Store the power cord side (top) of the echo dot first, then store the opposite side (bottom)

■Wiring without overlapping power cords

• To achieve a thin design, please route the power cords so they do not cross

■Notes

I printed with PETG

Printable with A1 mini

Please enable support for printing