3D-Fuel G1 Filaments Clips
Print Profile(2)
Description
Similar to my other filament clips, I was unable to find clips for 3D Fuel PCTG spools online that are AMS and EIBOS Polyphemus rotary function compatible. So I decided to design my own from the ground up.
Enjoy, and share your results. If you encounter issues please let me know, and I will do what I can to help.
Features:
- Removable Some clips have so much friction you cannot remove them without breaking the prongs, these are removable and compliant
- Ultra lightweight at ~1.05g per clip
- Perfectly sized to fit 1.75mm filament without squishing it
- Tested: Tested on (3) 3D-Fuel PCTG spools, I have not tested on 3D Fuel pla/petg spools, but they appear visually the same via 3D Fuels website.
- One print profile: One profile for PETG and PCTG clips,
- Prints without Brim, if you run into print failures add a brim, but filament clips have much less cleanup without brims.
Print and Assembly Notes:
- Filament Type: I recommend printing in the same filament type that is on the spool (for drying compatibility
- Important Note for Specific Filament Types:
- If you use PCTG to print your clips I highly recommend following manufacturer guideliens and using low movement speed ~80mms for walls/infill
- If you use Bambu PETG-HF to print your clips be sure to set your profile shrinkage setting to 99.5%
- Suggest Printing test print to validate the filament tightness sizing before a larger batch.
- You only need 1-2 clips per spool.
- For AMS suggest only placing clips on the right side of the spool, one top and one bottom.
- For AMS Lite suggest only placing 2 clips on outside of the spool (when loaded to AMS). one top and one bottom.
Print Profile Notes:
Nozzle: Suggest 0.4mm nozzle for precision fit
Wall Loops: 2 wall loops on 0.4mm nozzle, 0.6mm nozzle not recommended due to decreased layer adhesion.
Layer Height: Suggest 0.16 or 0.20mm to maximize strength (0.16mm default)
Infill: No infill used.
Brim: default no brim, if you get failures switch to 2.5mm brim
Material: PETG, PCTG, PLA ()
Color: Any
Print Orientation: Print with filament clip area face down as seen in 3mf file
Supports: None
3d Printers: Should be printable on any printer.
Filament amount required: ~1.05g per clip
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)