Peg Box Base Unit Replacement with Optimizations
Print Profile(1)
Bill of Materials
- Nylonschnur 2,5mm x 1: in gewünschter Länge
Description
Unfortunately, the original peg box delivered was not completely in order upon delivery, but since I didn't want to make the little one wait for a replacement, I designed a substitute and directly optimized a few small things. The replica is thinner and narrower so that a stack of cards fits exactly, and the cards don't slide back and forth. This also makes inserting the pin easier for the little ones.
I recommend a 2.5mm nylon cord of preferred length (I used 15cm) to connect the box to the plug pin. To do this, tie a knot in the cord, trim the end with scissors, and secure the knot with heat or a drop of superglue, then guide it from the inside of the peg box through the hole to the outside. Now tie a knot at the other end and also trim and secure it. Place the knot in the recess of the plug pin and secure both sides with superglue.
Important: Due to the print orientation and gluing, the plug pin is extremely stable - nevertheless, I assume no liability if small parts are swallowed. Please always stay near your child while playing and do not use the model if you do not want to take responsibility, as I do not take it!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)