F18 Ejection Seat Switch
Print Profile(1)
Bill of Materials
Description
Ejection Seat Pull Switch
This is my simple design for F18 styled ejection seat switch, it is a tight fit with the limit switch, I will recommend wiring that up first before installation into the body. There are two positions for the switch and springs. As you can see I bent the lever of the switch at the tip to interact with the activator on the pull mech. As for the parts I used they are listed with mostly ALIEXPRESS parts as I bought mine from a local electronics shop. For the handle itself, its a power lead cut and wrapped with braided sleeve and the wrapped with yellow electrical tape and fitted with a cable gland into the pull mech. It is again a tight fit and a bit fiddly getting the cable gland into position on the pull mech as I didn't want to compromise the overall size. It does have 4 mounting holes on the back of the box.
Boost Me (for free)
If you enjoy this design and it has helped you. I hope you would consider a BOOST
Parts-
-7 x button head M3
-6 x button head M5
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)