TCG Flatpack (2x60 or 120 cards)
Print Profile(1)
Description
TCG Flatpack
Summary
This deckbox is designed for efficient storage and transportation.
It can hold two 60 card decks (single-sleeved), or a full double-sleeved 100 card deck (e.g. MTG Commander).
Embedded magnets in the box and lid keep the contents secure while giving a satisfying snap open and close.
The front side includes a window, that features and frames the art of an MTG card.
Three thumb notches on the top let you easily grab the cards.
The chamfered center guide allows for easy sliding of your deck back into the box.
A small recess in the lid can hold an optional NFC sticker to scan with your phone (e.g. image of Commander or URL to decklist).
After numerous iterations and over a year of tinkering, this is finally the version that I'm happy to release.
Thanks for checking it out, looking forward to any feedback!
Materials
- Use any filament or combination of filaments that you like!
- Magnets (25x4x3): https://www.amazon.de/dp/B0D3QCBP4P
- NFC Sticker (25mm): https://www.amazon.de/dp/B0BJP9876S
Guide
- best mark your magnets with a stripe on one side
- pause the print at the last layer before covering the magnet holes
- place the magnets
- left and right magnets are rotated 180 degrees in plane
- lid magnets are additionally put on their head (rotate 180 degrees towards you)
- resume the print
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)