Thundercats sword of Omens
Print Profile(1)
Bill of Materials
Description
This is a full-size replica inspired by the Thundercats Sword of Omens. Its overall length is right around 45 inches. it's designed to be able to put a 5mm rod though the center to stiffen it up, the blade takes a 5mm x 765mm rod and the handle takes a 5mm x 294mm rod.
01/09/26 Edit - added a couple options people was asking for 1 the center housing having the hole for the metal rod going all the way through, the 2nd one the cat eye and cat head made into 2 pieces so the color doesn't overlap and the black shows through the red and flatten the back of them so you don't need supports.
UPDATE 4/25/26 I have added new cat head and cat eye with housing that hold 6mm x 2mm magnets so you can switch them out easily, also had a request to separate the lower blade and the triangles on the side has been added
Here is a link for 5mm rods that will work in the blade and handle on amazon, you will have to cut them shorter to fit
Boost Me (for free)
If you like what you see please consider boosting it would go a long way in helping me and I would greatly apricate it, thank you and Happy printing
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (139)