Stranger Things Surfer Boy Pizza Light box.

This lightbox was inspired by the Stranger Things series, and the 1st on Maker World. 

This is the sign off the roof of the famous VW T3 pizza delivery van driven by employee and friend of Jonathan Byers, Argyle

This is a easy 5.5 hour print over 2 plates using 0.4 Nozzle, I would recommend 0.2 nozzle but this will increase the print time. 

I would recommend using my settings as they seem to work well on a textured plate but please try your own and make sure your printer is calibrated and dialled in.

This is easy to assemble and just clicks together. 

There is a hole in the back for your LED's to pass through. (This can be moved where you need it in the slicer)

RECOMMENDATIONS

- use a textured PEI sheet.
- use the print profile, it has quite a few setting changes that help achieve the best results.
- make a hole for the USB strip wherever you like using a drill or in the slicer and you can move the 1 I made as a negative part.
- glue the LED's the further away from the coloured design as possible as placing them too close can ruin the diffusion and the individual LED's become obvious. 

Materials and tools:
- glue gun
- led strip: simple 1m white led USB

- soldering iron (optional)

Please leave comments, likes and share your pictures. Boosts are as always VERY appreciated. 

models are fanart and are shared as artistic tributes, you may not sell, share, or profit from them.