Countach key hanger - Free 3D Print Model

Search models, users, collections, and posts

fabio.becce23

Household>Decor

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.16mm layer, 3 walls, 6% infill

Designer

10.4 h

6 plates

5.0(20)

A1 MINI

Designer

11.8 h

7 plates

5.0(6)

Open in Bambu Studio

Boost

376

678

301

146

Released

Description

Content has been automatically translated.

Show original

Wall-mounted key holder inspired by the iconic rear of the Lamborghini Countach LP500S, the most muscular and provocative version of the legendary supercar from Sant'Agata. The flared wheel arches and sharp lines evoke the era when the Countach broke every rule, becoming an absolute symbol of the 80s and the Italian automotive dream.

The model is designed to be easy to print and achieve a high-quality finish on every visible part. Assembly will also be very simple and intuitive; a small assembly guide is provided which I still recommend viewing. The spoiler might require a slight cleaning after printing, but nothing demanding and nothing that would compromise its final quality.

The most important things to pay particular attention to are solely the correct positioning of the air intakes and headlight frames, but this will be clearly intuitive without problems. Also, pay attention to the small recess on the bottom grille; it is used to correctly position the exhaust tips! Therefore, I recommend trying to position the parts before gluing to ensure the final assembly.

Happy printing everyone!

Documentation (1)

Assembly Guide (1)

Assembly.png

Comment & Rating (53)

@Mace42

Boosted

love it! Cannonball Run 2 vibes! I made the exhaust with a filament change, to change from black to silk silver; and as i only need two hooks a made myself a skadis adapter as i cannot just mount it. Also i use ironing on the lights to have a slight contrast while i use the "rough" plate a surface for the as all your designs, all extremely awesome, have the same mount (screws to the wall), did you consider providing a skadis adapter, maybe utilizing the universal skadis hook? just as a thought. license forbids remixes so no way of contributing it I guess 🤷‍♂️ but once again: Awesome work, great result. I love it!

The designer has replied

@fabio.becce23

Great job friend! The two-tone terminals are beautiful! The headlights were already designed to create contrast :) The larger red part should be mounted in reverse because if you look, it has a chamfer, the 3 small squares also have a chamfer, and those are precisely facing the print bed to have a different finish. Being small, perhaps it was a detail I should have specified. Justly, one might not notice! For the skadis adapter, I could probably use a hole spacing that is compatible and create a simple compatible hook. I will get the skadis panel! Thanks for your suggestions!

Show original

@Mace42

Boosted

Replying to @fabio.becce23 :

ah now that you mention it, yes. maybe i re-print the red parts again then - thanks for the hint

@user_420286715

Boosted

this has became my favorite print. it is absolutely amazing and everyone who has seen it loved it as well. 👍👍 HOPE TO SEE MORE!!

The designer has replied

@fabio.becce23

Beautiful red, great job!!!

Show original

@user_1401632382

Print Profile

0.16mm layer, 3 walls, 6% infill

top

The profile uploader has replied

@fabio.becce23

Great job! Be careful with the exhaust pipes, they should be attached lower down :)

Show original

@nickosubcon

Boosted

as always Fabio, brilliant design, having the wheels really finishes it off very well

The designer has replied

@fabio.becce23

Great work! thanks for sharing your print :)

Show original

@ROCKETDOG01

Fantastic print one of my favourites so far just the lights to add

The designer has replied

@fabio.becce23

Excellent choice of colors! very nice. Too bad about the spoiler, I see it had some problems! I recommend orienting it as on my print profile! Thanks for sharing!

Show original

@POLVERE

Print Profile

A1 MINI

Amazing !!!!! can you make a Golf R32 MK4

(Edited)

Show original

@BramDesc.

Print Profile

A1 MINI

Very original idea as key hanger. No print problems at all with the stock settings. Keep making nice models man!

@Cooney1

This is what I see when I go to the stl. file for the key holder. All other obj,s are there and print except for this one??? Thanks Cooney

The designer has replied

@fabio.becce23

Hi, I tried to open it individually like you. It opens correctly without errors on Bambu Studio. Not on OrcaSlicer. Send me a private message so I can send you the file. You have to write to me first otherwise it won't let me send files! Hi

Show original

@nickosubcon

Boosted

Print Profile

0.16mm layer, 3 walls, 6% infill

great design as always fabio thankyou

(Edited)

@user_409533632

Boosted

Print Profile

0.16mm layer, 3 walls, 6% infill

perfect

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.