Carl Fredricksen (UP) Multipart | AMS Ready

Bring the heartwarming charm of Pixar's Up to your desk with this detailed model of Carl Fredricksen!

This model has been designed for easy printing and assembly. It is available in two formats to suit your hardware:

1. 3MF File (Bambu Studio): Pre-painted and ready for multi-color printing using the AMS.
2. Multipart STLs: Split into separate parts by color. This allows you to print pieces individually and assemble them later—perfect for reducing waste or if you don't have an AMS unit.

✨ Key Features:

• High Detail: Captures Carl's iconic glasses, bow tie, and grape soda badge.
• Easy Assembly: Parts are keyed for perfect alignment.
• Optimized for FDM: Orientation chosen to minimize supports and hide layer lines.

🖨️ Printing Instructions:

• Material: PLA (Matte PLA looks great for the suit and skin tones).
• Nozzle: 0.4mm standard.
• Layer Height: 0.16mm or 0.20mm (0.12mm recommended for the face/glasses for better detail).
• Infill: 10-15% Gyroid is sufficient.
• Walls: 2 or 3 walls.
• Supports: Minimal supports required. [Note: Check your specific slice, but usually "Tree Supports (Auto)" works best for the hands and glasses].

🎨 Colors Used:

• Skin Tone (Face/Hands)
• Dark Brown (Suit Jacket)
• Olive Green/Khaki (Pants)
• White (Shirt/Hair)
• Black (Glasses/Bow tie)
• Grey (Walker/Cane)

🛠️ Assembly: Use a few drops of CA glue (Superglue) to join the parts. The tolerances are tight, so ensure your flow calibration is correct.

Happy Printing! If you like this model, please leave a generic Like and post your Make pictures!