Casting mold box
Print Profile(2)
Description
Casting Mold Box
for individual casting of silicone models
The casting mold box has an inner height of 100mm, an inner width from 50x50mm to 200x150mm
(6 base plates available in a 50mm grid)
The side walls are available in either 50mm or 100mm length. They are provided with an embossed or colored scale in 5mm increments
The corner profiles are 25x25mm
Simply assemble it. Attach foldback / binder clips to the sides
An M4 screw hole is provided in the center to screw down the model, or you can simply glue it to the base plate
Thanks to the colored scale, you can pre-determine what height you need to reach
The wide marks are 10mm intervals and the shorter ones are 5mm
I use these binder clips https://amzn.to/491MuWn in 25mm and 51mm
And this silicone https://amzn.to/44TRIRL from LM kreativ
Depending on the height to be cast, you should use stronger ones and clamp them additionally at the bottom
Membership
Don't miss my other models on my profile.
https://makerworld.com/en/@Chakalaka/upload
If you want to support me once, you have the opportunity here, thank you very much
Boost Me (for free)
Do you like my models? Then I would be very happy about a boost – so I can create many more designs for you. I am open to all feedback – whether praise, criticism, suggestions or new ideas. Thank you for your support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (38)