Sealed Magnetic Poop Container

Sealed Magnetic Poop Container (H2D / H2S / H2C Compatible)

A compact, sealed magnetic poop container for the H2D printer, and it should also fit the H2S and H2C models (including the laser variants).

There are already a lot of options out there, but many of them either use more filament than necessary or add extra features that I personally did not need (like long poop slides). My main goal was to keep it simple, light, and easy to live with. I also wanted to make sure there is no easy path for ABS (and other plastic) odors to escape from the build chamber through the poop chute opening.
 

Why this one?

• No unscrewing of the original back panel screws
• Quick attachment and removal (magnetic)
• Sealing option using 5 mm x 1 mm foam tape to reduce smell from the chute opening
• Minimal material use (walls are 1 mm thick)
• Clean design that does not block the ventilation openings or restrict airflow for the built-in air pump

Notes

• Built-in modeled support for the top bridging (easy to remove after printing)
• Max 45° overhangs
• No additional supports required
• Recommended material: ABS / ASA

Hardware and tools

• 6 mm x 3 mm magnets (10 pcs)
• Super glue (to secure the magnets)
• 5 mm x 1 mm foam tape (to seal the chute opening)

Assembly

1. Carefully remove the built-in support (marked in red in the image).
2. Add a tiny dab of super glue and press the magnets into the hexagonal slots.
3. Cut foam tape to length and stick it around the sealing area.

Attachment

• Align the two “ears” with the top of the poop chute opening, then let the magnets snap it into place.