Shelf / Pedestal for the Toniebox in Kallax

This is a shelf / pedestal with which the Toniebox and Tonies (21 pieces) can be neatly stored in a Kallax shelf compartment.

The model is optimized for the build volume of the H2S.

Due to its modularity, there is only one color per print plate, which is why printing is also possible without AMS.

Washers with dimensions of 6.4 x 35 x 1.2 mm are glued in from below. When splitting the objects, the recesses for the washers can also be removed. Then the Tonies will no longer be held magnetically, but they could be stored more closely.

If the internal supports on the outer surfaces are used, the model can also be placed outside a shelf.

When assembling the individual parts, some glue should be used to achieve optimal fit and hold.